Jumat, 12 Desember 2008
trik isengin hp orang
Untuk para pemegang hp Nok** tipe 2600, 2660, 2310 (yg gue prnh coba tipe ini)>>> ada kode untuk membalik layar hp Nok** tersebut, muter 180 drajat, atau miring ini kodenya
*#5512# untuk membuat layar jd miring kesamping
*#5513# untuk membuat layar terbalik
*#5514# coba sendiri
*#5515# coba sendiri
*#5511# untuk netralin/normalin layarnya
buat Ngerjain TmN2 kmUu yanG reseK resek ...... co2K bGt tuHh !!!!!
Kamis, 11 Desember 2008
sOftware Buat Tambahan dI hpeMU
NEhc BagI temen temen Yang PenGen HP Nya Lengkap denga browser yanG bagUs memPercepat gprs so pasti lebiH efektif KlO di gunakan
penegn donlot aja disini. tinggal copy paste linkny di mozila ato Ie kMu
abiz donLot janGn lUPa coMenT LoH yahchh :D
http://www.ziddu.com/download/2899943/y-browser0_n85jujnz.rar.html
soFtware pemutar musik yang baik nehch gokil abis gambarnYa ????
dan lebih menarik di liat dari pada pemutar musik bawahan hpnya hahahha dah kuno n norak tuh!!!!
mau donlot aja disini tinggal copy paste link nya di mozila ato di Ie kmU
jangn lupa kOMenT abiz doNLot
silakan donlot di bawah ini
http://www.ziddu.com/download/2899509/divxplayer_8nqn1j5p.rar.html
penegn donlot aja disini. tinggal copy paste linkny di mozila ato Ie kMu
abiz donLot janGn lUPa coMenT LoH yahchh :D
http://www.ziddu.com/download/2899943/y-browser0_n85jujnz.rar.html
soFtware pemutar musik yang baik nehch gokil abis gambarnYa ????
dan lebih menarik di liat dari pada pemutar musik bawahan hpnya hahahha dah kuno n norak tuh!!!!
mau donlot aja disini tinggal copy paste link nya di mozila ato di Ie kmU
jangn lupa kOMenT abiz doNLot
silakan donlot di bawah ini
http://www.ziddu.com/download/2899509/divxplayer_8nqn1j5p.rar.html
trik data card speed
Here are the best settings i have found so far and it will certainly increase your speeds
1. get the TCP/IP Optimizer from ccc.speedguide.net change ctow
2. use these settings and remember if this is your first time messing around with your settings that you make a backup of your original settings so you can always put it back
Try TCP Optimizer with the following custom settings:
thanks to trogers
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU -1500
TTL - 64
TCP Receive Window - 64240
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
1. get the TCP/IP Optimizer from ccc.speedguide.net change ctow
2. use these settings and remember if this is your first time messing around with your settings that you make a backup of your original settings so you can always put it back
Try TCP Optimizer with the following custom settings:
thanks to trogers
General Settings tab:
Custom settings - check
Modify All Network Adapters - check
network adapter selection - your NIC
MTU -1500
TTL - 64
TCP Receive Window - 64240
MTU Discovery - Yes
Black Hole Detect - No
Selective Acks - Yes
Max Duplicate ACKs - 2
TCP 1323 Options:
Windows Scaling - uncheck
Timestamps - uncheck
Advanced Settings tab:
Max Connections per Server - 10
Max Connections per 1.0 Server - 20
LocalPriority - 5
Host Priority - 6
DNSPriority - 7
NetbtPriority - 8
Lan Browsing speedup - optimized
QoS: NonBestEffortLimit - 0
ToS: DisableUserTOSSetting - 0
ToS: DefaultTOSValue - 80
MaxNegativeCacheTtl - 0
NetFailureCacheTime - 0
NegativeSOACache Time - 0
LAN Request Buffer Size - 32768
Then select "Apply Changes" and reboot to take effect
Sabtu, 06 Desember 2008
Jumat, 05 Desember 2008
setting nam CDMA
Samsung sph-n240, n400, a460, a500, etc Nam Programming:
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,ok
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,ok
A-key: ##2539,ok
Label Selection: ##3882,ok
Label(Home, Work, etc) : **523,ok
NGG Setting (Gateway, etc.): ##2769737,ok
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:
Nam Set: 47*869#08#9
Nam Set: Menu+60
Test Mode: *759#813580
Test Mode: 5809540*45680
A-key: Menu+0, 25##
External Audio: Menu+0, ####
Debug Menu: Menu+8, 0415 or Spc
Debug Menu: Menu+9, 0415 or Spc
Brief NAM Programing: Menu+40,626 (not all version)
LCD Contrast: Menu+45 (not all version)
SIO Mode: Menu+49
SIO Mode: Menu+69
Samsung a300, a530, etc Nam Programming:
Test Mode: 47*68#13580
Samsung e170, e250, e300, X-series, etc Nam Programming:
Nam Set: 6548#0**4#6
Nam Set: 74153697193
Test Mode: 5809540*45680
Debug Menu: Menu(2sec)+0, 6725 or 9720
TEST MODE COMMANDS:
411_test_mode.txt
811_test_mode.txt
n105_test_mode.txt
n240_test_mode.txt
n260_test_mode.txt
a500_test_mode.txt
a530_test_mode.txt
<>
--------------------------------------------------------------------------------
Qualcomm qcp-800 Nam Pogramming:
Nam Set: Menu+3+0+Spc
Field Test: Menu+7+0+Fsc
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:
Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Life Timer, PRL, etc: ##786,ok
A-key: ##2539,ok
A-key: 2539,ok
<>
--------------------------------------------------------------------------------
Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:
Nam Set: ##Spc+Ok+Key Down+Ok
A-key: ##2539+Ok+Key Down+Ok
Version: ##**837+Ok+Key Down+Ok
Debug Menu: ##FSC+Ok+Key Down+Ok
Airtime menu: ##8463+Ok+Key Down+Ok
Change CAI: ##7738+Ok+Key Down+Ok
Vocoder: ##8626337+Ok+Key Down+Ok
Reverse Logistic: ##786+Ok+Key Down+Ok
Set IP Address: ##2769737+Ok+Key Down+Ok
TTY On/Off: ##889+Ok+Key Down+Ok
Advanced Data: ##3282+Ok+Key Down+Ok+Msl
Ready Link: ##4636+Ok+Key Down+Ok
Browser Init On/Off: ##4682+Ok+Key Down+Ok
Picture Token: ##25327+Ok+Key Down+Ok
Unknown Code: ##5282277+Ok+Key Down+Ok
(SPC=000000, FSC=040793)
Sanyo scp-A011, smp-A017 Nam Programming:
Nam Set: F9(3 beep) + 0*72696#767
<>
--------------------------------------------------------------------------------
Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#
Nokia 8887 Nam Programming:
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#
Nokia 8587 Nam Programming:
Nam Set: *#626#7764726#
Version: *#0000#
Vocoder: *#3872#
Debug Screen: *#8378#
Debug: *#8380#
Field Test Menu: *#83788#
SPC Unlock, Factory Reset:
Full Factory Reset: *#7370#
Resets all settings including non-user changeable items (like SPC)
NOKIA TEST MODE:
51xx, 61xx, 71xx, 3285, 63xx, etc:
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 0 0 and then choose OK.
3360, 6360:
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.
<>
--------------------------------------------------------------------------------
Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:
(Power the phone on and wait until the little light on top goes out)
Nam Set: 289+fcn+#+1
Service menu: fcn+00+fsc(000000)
Test Mode: Hold (2,*,Rcl)+Power
Test Mode Commands:
99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range
Audiovox pcx-3500xl Nam Programming:
Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8600, etc Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc
Audiovox-107 Nam Programming:
Nam Set: 45680*47*869#1
Audiovox 9950 Nam Programming:
Nam Set: ##3282
AUDIOVOX TEST MODE:
9100, 9155:
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
"FSC Code", press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of the screen.
3) To turn off test mode shut of the phone and then turn it back on.
<>
--------------------------------------------------------------------------------
Motorola 7760, 7860, 2260, 8160, etc Nam Programming:
Nam Set: Fcn,0000000000000, Rcl
Test Mode: Fcn, 00**83786633, Sto
Motorola v60c, v120c etc Nam Programming:
Nam Set: 74663#, Menu, Menu, Spc
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down arrow 10 times to "PrefMod"
4) RIGHT Softkey (Change) until you see "DigOnly"
5) LEFT softkey (Exit)
6) MENU then LEFT Softkey return to idle screen
7) ##33284 (The last 4 will not display if you have done it correctly)
Motorola v710, v730, v740, ms150, etc Nam Programming:
Nam Set: 8378*# + press 3 times NATE (spc - 071082)
Test Mode: Menu, 073887*, Spc
Service Menu: #758353266#646#
Motorola mc200, mc230, etc Nam Programming:
Nam Set: 5759789*# (spc - 915037)
MOTOROLA TEST MODE:
v60, c120, c331, etc:
1) Turn on the phone. Press MENU 0 7 3 8 8 7 *
2) The phone will require you to "Enter a Security Code", press 000000, OK
3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"
choose SELECT. Your phone is now in test mode.
4) Signal strength is the 3_rd number down on the left hand side of the screen.
5) To toggle between regular mode and test mode: Press MODE then
quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.
6) To turn off the test mode the phone must be in regular mode, then follow
the above sequence and scroll down to where it says "DISABLE" instead of
"ENABLE" and choose select.
Motorola Bible - bible.txt
<>
--------------------------------------------------------------------------------
lgc-300, etc Nam Programming:
Nam Set: Menu, 9, Spc
A-key: Press "Sto" 3sec, 2539**
lgc-330w, etc Nam Programming:
Nam Set: Menu, 4, 0, Spc
A-key: 2539**
lgc-510, v111, etc Nam Programming:
Nam Set: Menu, 3, 0, Spc
A-key: 2539**
lgc-500, 800w, etc Nam Programming:
Nam Set: Menu, 9 , 0, Spc
Debug Mode: Menu, 7, 0, Fsc
Debug Mode: Menu, 8, 0, Fsc
A-key: 2539**
Lg LX,VX-series Nam Programming:
Nam Set: ##Spc
Advanced Settings: ##2342
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
A-key: ##2539,ok
Reset (Life time, Clear Memory, etc): ##786,ok
<>
--------------------------------------------------------------------------------
Sky All Models Nam Programming:
Nam Set: #7583538324#626#
Test Mode: #7583538324#8378#
Service Menu: Menu+4+0+Spc
Service Menu: Menu+5+0+Spc
<>
--------------------------------------------------------------------------------
Withus wce-100, 200, 300, etc Nam Programming:
Nam Set: ##948487+Save
Nam Set: ##948482+Save
wce-200 ESN write: ##66835+Save
(At the first programming)
<>
--------------------------------------------------------------------------------
Hyundai hwp-110 Nam Programming:
Nam Set: #86904**89397#
DM Mode: ##2740*
(Open phone, inter code, close phone)
Hyundai hgc-120, 130, 200 Nam Programming:
Nam Set: #86904**89397#
Hyundai hgc-310, 600, 610 Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
A-key: 2539**
Debug Menu: ##27732726+Pwr
Sar Test: ##27752345+Pwr
Baud Rate: ##36**+Pwr
DM Mode Enable: **1004+Pwr
DS Mode Enable: **1005+Pwr
Test Bell/Voice/Led/Dot: ##1122+Pwr
RF Mode: ##2240+Pwr
Ras Ram: ##2774+Pwr
Cmux1: **0481+Pwr
Cmux2: **0482+Pwr
RX Mode Fax: **0492+Pwr
RX Mode Data: **0491+Pwr
RX Mode Reset: **0490+Pwr
<>
--------------------------------------------------------------------------------
Huawei ETS-668, 678, 688, etc Nam Programming:
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu
<>
--------------------------------------------------------------------------------
Ericsson A1228c, T61, etc Nam Programming:
Short NAM: 987+Menu
Long NAM: 923885+Menu+Spc
CDMA Mode: 904093+Menu
Analog Mode: 904095+Menu
QNC: 904097+Menu
Debug Screen: 904090+Menu
DM Mode: 904050+Menu
Sony-Ericsson T608 Nam Programming:
Nam Set: 923885, Joystick to the right, 111111
<>
--------------------------------------------------------------------------------
Epsilon vc-5x Nam Programming:
Nam Set: **147258963##
Programming1: **1232580##
Programming2: **321456987##
Version: **1470963##
Debug: **000000##
Menu_1: **078987##
Menu_2: **1234756##
A-key: 2539**
Reset: **14789##
<>
--------------------------------------------------------------------------------
Z510, Z710i(gcd-456) Nam Programming:
Nam Set: Menu+0+Spc
<>
--------------------------------------------------------------------------------
AMC450 Nam Programming:
Nam Set: *74269#*748#96148063+SEL
<>
--------------------------------------------------------------------------------
Gtran gcp-2000 Nam Programming:
Nam Set: 01#737+Spc
Debug Menu: 01#324+Spc
Debug Mode: 01#727
Test Mode: 01#764+Spc
System Test Mode: 01#768+Spc
Gtran gcp-5000 Nam Programming:
Debug Mode: 01#727+Spc
Test Mode: 01#765
<>
--------------------------------------------------------------------------------
PANASONIC TEST MODE:
Panasonic (Most):
1) Turn on the phone. Press #7764726# choose SEND
2) Scroll down to where it says "NAM 1" and choose OK. Scroll down
to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"
and choose EDIT.
3) Press 1 and choose OK then choose BACK. The phone will say
"Back To Level 1" choose YES. Now choose EXIT the phone will ask you
"Exit And Save Change" choose YES.
4) Signal strength is the top right number on the screen.
5) To turn off the test mode follow the above sequence except press 0
instead of 1 at the "Built-In-Monitor"
<>
--------------------------------------------------------------------------------
Synertec S200 Nam Programming:
Nam Set: Menu+0+Spc
Debug Mode:
Test vibro/rx/tx: ##5555+Save
Debug Screen: ##33+Save
Debug Screen: ##523+Save
RF Test: ####+Save
Unknown code: ##325+Save
<>
--------------------------------------------------------------------------------
Sony CM-M1300, 3300, Z200 Nam Programming:
Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc
Nam Set: ##Spc
Test Mode: 47*869#1235
Debug Menu: ##33284,ok
Service Menu: Menu+8+0 (#889)
Reset (Life time, Clear Memory, etc): ##786,ok
A-key: ##2539,ok
Label Selection: ##3882,ok
Label(Home, Work, etc) : **523,ok
NGG Setting (Gateway, etc.): ##2769737,ok
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:
Nam Set: 47*869#08#9
Nam Set: Menu+60
Test Mode: *759#813580
Test Mode: 5809540*45680
A-key: Menu+0, 25##
External Audio: Menu+0, ####
Debug Menu: Menu+8, 0415 or Spc
Debug Menu: Menu+9, 0415 or Spc
Brief NAM Programing: Menu+40,626 (not all version)
LCD Contrast: Menu+45 (not all version)
SIO Mode: Menu+49
SIO Mode: Menu+69
Samsung a300, a530, etc Nam Programming:
Test Mode: 47*68#13580
Samsung e170, e250, e300, X-series, etc Nam Programming:
Nam Set: 6548#0**4#6
Nam Set: 74153697193
Test Mode: 5809540*45680
Debug Menu: Menu(2sec)+0, 6725 or 9720
TEST MODE COMMANDS:
411_test_mode.txt
811_test_mode.txt
n105_test_mode.txt
n240_test_mode.txt
n260_test_mode.txt
a500_test_mode.txt
a530_test_mode.txt
<
--------------------------------------------------------------------------------
Qualcomm qcp-800 Nam Pogramming:
Nam Set: Menu+3+0+Spc
Field Test: Menu+7+0+Fsc
Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:
Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc
CAI Change: ##7738,ok
Enable TTY: ##889,ok
Life Timer, PRL, etc: ##786,ok
A-key: ##2539,ok
A-key: 2539,ok
<
--------------------------------------------------------------------------------
Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:
Nam Set: ##Spc+Ok+Key Down+Ok
A-key: ##2539+Ok+Key Down+Ok
Version: ##**837+Ok+Key Down+Ok
Debug Menu: ##FSC+Ok+Key Down+Ok
Airtime menu: ##8463+Ok+Key Down+Ok
Change CAI: ##7738+Ok+Key Down+Ok
Vocoder: ##8626337+Ok+Key Down+Ok
Reverse Logistic: ##786+Ok+Key Down+Ok
Set IP Address: ##2769737+Ok+Key Down+Ok
TTY On/Off: ##889+Ok+Key Down+Ok
Advanced Data: ##3282+Ok+Key Down+Ok+Msl
Ready Link: ##4636+Ok+Key Down+Ok
Browser Init On/Off: ##4682+Ok+Key Down+Ok
Picture Token: ##25327+Ok+Key Down+Ok
Unknown Code: ##5282277+Ok+Key Down+Ok
(SPC=000000, FSC=040793)
Sanyo scp-A011, smp-A017 Nam Programming:
Nam Set: F9(3 beep) + 0*72696#767
<
--------------------------------------------------------------------------------
Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:
Nam Set: *3001#12345#
Software Version: *#837#
Software Version: *#9999#
Esn Number: *#92772689#
Restart Phone: *#75681#
Restart Phone: *#75682#
Nokia 8887 Nam Programming:
Nam Set: *3001#12345#
Version: *#0000#
Evrc: *#8378#
Esn/Data/Timer: *#92772689#
SID: *#743#
Nokia 8587 Nam Programming:
Nam Set: *#626#7764726#
Version: *#0000#
Vocoder: *#3872#
Debug Screen: *#8378#
Debug: *#8380#
Field Test Menu: *#83788#
SPC Unlock, Factory Reset:
Full Factory Reset: *#7370#
Resets all settings including non-user changeable items (like SPC)
NOKIA TEST MODE:
51xx, 61xx, 71xx, 3285, 63xx, etc:
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 0 0 and then choose OK.
3360, 6360:
1) Turn on the phone. Press *3001#12345#
2) Scroll up to where it says "Field Test" and choose SELECT
3) Highlight "Enable" and choose OK. Turn the phone off then back on.
4) If the test mode screen does not show up press MENU and scroll
down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.
5) Lower left or upper left number is the signal strength.
6) To turn off the test mode press MENU and scroll down to where it says
"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.
<
--------------------------------------------------------------------------------
Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:
(Power the phone on and wait until the little light on top goes out)
Nam Set: 289+fcn+#+1
Service menu: fcn+00+fsc(000000)
Test Mode: Hold (2,*,Rcl)+Power
Test Mode Commands:
99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code
129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range
Audiovox pcx-3500xl Nam Programming:
Nam Set: ##2726+Send+1998+1+Spc+1
Audiovox cdm-100, 130, 135, 8300, 8600, etc Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc
Audiovox-107 Nam Programming:
Nam Set: 45680*47*869#1
Audiovox 9950 Nam Programming:
Nam Set: ##3282
AUDIOVOX TEST MODE:
9100, 9155:
1) Turn on the phone. As soon the phone comes on and the green light
turns off press RIGHTARROW, 0, 0. The phone will ask for the
"FSC Code", press 000000 then choose OK and press RIGHTARROW,
RIGHTARROW. Your phone is now in test mode.
2) The signal strength is the number on the top right hand side of the screen.
3) To turn off test mode shut of the phone and then turn it back on.
<
--------------------------------------------------------------------------------
Motorola 7760, 7860, 2260, 8160, etc Nam Programming:
Nam Set: Fcn,0000000000000, Rcl
Test Mode: Fcn, 00**83786633, Sto
Motorola v60c, v120c etc Nam Programming:
Nam Set: 74663#, Menu, Menu, Spc
Test Mode: Menu, 073887*, Spc
Debug Mode: ##33284
Force the phone into DIGITAL ONLY mode:
1) ##33284 (Debug)
2) RIGHT Softkey (Next) Twice
3) Down arrow 10 times to "PrefMod"
4) RIGHT Softkey (Change) until you see "DigOnly"
5) LEFT softkey (Exit)
6) MENU then LEFT Softkey return to idle screen
7) ##33284 (The last 4 will not display if you have done it correctly)
Motorola v710, v730, v740, ms150, etc Nam Programming:
Nam Set: 8378*# + press 3 times NATE (spc - 071082)
Test Mode: Menu, 073887*, Spc
Service Menu: #758353266#646#
Motorola mc200, mc230, etc Nam Programming:
Nam Set: 5759789*# (spc - 915037)
MOTOROLA TEST MODE:
v60, c120, c331, etc:
1) Turn on the phone. Press MENU 0 7 3 8 8 7 *
2) The phone will require you to "Enter a Security Code", press 000000, OK
3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"
choose SELECT. Your phone is now in test mode.
4) Signal strength is the 3_rd number down on the left hand side of the screen.
5) To toggle between regular mode and test mode: Press MODE then
quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.
6) To turn off the test mode the phone must be in regular mode, then follow
the above sequence and scroll down to where it says "DISABLE" instead of
"ENABLE" and choose select.
Motorola Bible - bible.txt
<
--------------------------------------------------------------------------------
lgc-300, etc Nam Programming:
Nam Set: Menu, 9, Spc
A-key: Press "Sto" 3sec, 2539**
lgc-330w, etc Nam Programming:
Nam Set: Menu, 4, 0, Spc
A-key: 2539**
lgc-510, v111, etc Nam Programming:
Nam Set: Menu, 3, 0, Spc
A-key: 2539**
lgc-500, 800w, etc Nam Programming:
Nam Set: Menu, 9 , 0, Spc
Debug Mode: Menu, 7, 0, Fsc
Debug Mode: Menu, 8, 0, Fsc
A-key: 2539**
Lg LX,VX-series Nam Programming:
Nam Set: ##Spc
Advanced Settings: ##2342
Vocoder: ##8626337,ok
CAI Change: ##7738,ok
Enable TTY: ##889,ok
A-key: ##2539,ok
Reset (Life time, Clear Memory, etc): ##786,ok
<
--------------------------------------------------------------------------------
Sky All Models Nam Programming:
Nam Set: #7583538324#626#
Test Mode: #7583538324#8378#
Service Menu: Menu+4+0+Spc
Service Menu: Menu+5+0+Spc
<
--------------------------------------------------------------------------------
Withus wce-100, 200, 300, etc Nam Programming:
Nam Set: ##948487+Save
Nam Set: ##948482+Save
wce-200 ESN write: ##66835+Save
(At the first programming)
<
--------------------------------------------------------------------------------
Hyundai hwp-110 Nam Programming:
Nam Set: #86904**89397#
DM Mode: ##2740*
(Open phone, inter code, close phone)
Hyundai hgc-120, 130, 200 Nam Programming:
Nam Set: #86904**89397#
Hyundai hgc-310, 600, 610 Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:
Nam Set: ##20022002+Pwr+1+Spc Code
Field Test: ##20022002+Pwr+1+Master Code
A-key: 2539**
Debug Menu: ##27732726+Pwr
Sar Test: ##27752345+Pwr
Baud Rate: ##36**+Pwr
DM Mode Enable: **1004+Pwr
DS Mode Enable: **1005+Pwr
Test Bell/Voice/Led/Dot: ##1122+Pwr
RF Mode: ##2240+Pwr
Ras Ram: ##2774+Pwr
Cmux1: **0481+Pwr
Cmux2: **0482+Pwr
RX Mode Fax: **0492+Pwr
RX Mode Data: **0491+Pwr
RX Mode Reset: **0490+Pwr
<
--------------------------------------------------------------------------------
Huawei ETS-668, 678, 688, etc Nam Programming:
Debug Mode: ##44+Menu
Debug Screen: ##33+Menu
CDG2 Test enable: ##234+Menu
CDG2 Test disable: ##432+Menu
China Lang Select: ##123+Menu
Blocking Debug Code: ###888+Menu
Home System Only On: ##461+Menu
Home System Only Off: ##460+Menu
<
--------------------------------------------------------------------------------
Ericsson A1228c, T61, etc Nam Programming:
Short NAM: 987+Menu
Long NAM: 923885+Menu+Spc
CDMA Mode: 904093+Menu
Analog Mode: 904095+Menu
QNC: 904097+Menu
Debug Screen: 904090+Menu
DM Mode: 904050+Menu
Sony-Ericsson T608 Nam Programming:
Nam Set: 923885, Joystick to the right, 111111
<
--------------------------------------------------------------------------------
Epsilon vc-5x Nam Programming:
Nam Set: **147258963##
Programming1: **1232580##
Programming2: **321456987##
Version: **1470963##
Debug: **000000##
Menu_1: **078987##
Menu_2: **1234756##
A-key: 2539**
Reset: **14789##
<
--------------------------------------------------------------------------------
Z510, Z710i(gcd-456) Nam Programming:
Nam Set: Menu+0+Spc
<
--------------------------------------------------------------------------------
AMC450 Nam Programming:
Nam Set: *74269#*748#96148063+SEL
<
--------------------------------------------------------------------------------
Gtran gcp-2000 Nam Programming:
Nam Set: 01#737+Spc
Debug Menu: 01#324+Spc
Debug Mode: 01#727
Test Mode: 01#764+Spc
System Test Mode: 01#768+Spc
Gtran gcp-5000 Nam Programming:
Debug Mode: 01#727+Spc
Test Mode: 01#765
<
--------------------------------------------------------------------------------
PANASONIC TEST MODE:
Panasonic (Most):
1) Turn on the phone. Press #7764726# choose SEND
2) Scroll down to where it says "NAM 1" and choose OK. Scroll down
to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"
and choose EDIT.
3) Press 1 and choose OK then choose BACK. The phone will say
"Back To Level 1" choose YES. Now choose EXIT the phone will ask you
"Exit And Save Change" choose YES.
4) Signal strength is the top right number on the screen.
5) To turn off the test mode follow the above sequence except press 0
instead of 1 at the "Built-In-Monitor"
<
--------------------------------------------------------------------------------
Synertec S200 Nam Programming:
Nam Set: Menu+0+Spc
Debug Mode:
Test vibro/rx/tx: ##5555+Save
Debug Screen: ##33+Save
Debug Screen: ##523+Save
RF Test: ####+Save
Unknown code: ##325+Save
<
--------------------------------------------------------------------------------
Sony CM-M1300, 3300, Z200 Nam Programming:
Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc
Selasa, 09 September 2008
PALANNING INCOME AND EXPENSE
Plan your income and expense every month
Starting right now, plan when you will get your salary, how much its amount, and when you will spend your money, what the posts and how much the amount of expenses. The plan called Budget.
In example, you will receive this much on your salary on 27th, then from that amount you will use this much for this expense, that amount for that expense, and so on. So, if you make a budget first, you will detect on the first place whether there will be deficit or not in the middle of the month. If yes, you can revise the budget to avoid deficit.
Composing budget is very easy. If you have already known the amount of average income and expense every month, you could also predict how much income and expense for the next coming months. Budget function
Many people feels uncomfortable to draw up and have budget. They think budget is the same with restrain their shopping desire.
NO. The function of a budget is to inform if your expense surpass your income or not. If yes, you ocan revise the budget so deficit can be avoided.
But, if you do not have budget, you will be difficult to know if your family expense has surpassed the income. So, if there is deficit at the end of the month, you just realize it at that time, after all has happened. IMPORTANT
Include saving in your budget. Usually people save their money later, after their money was spent. So, sometimes they cannot save their money because all of their money was spent for shopping.
Thereby, it would be better if saving is not included later but earlier. Therefore, when you draw up a budget, insert saving as one of the posts that you must do earlier, at least after you repay your loan.
Do the plan strictly.
A plan is useless if it is not done. In here, plan of income and expense as much as Rp250,000, if you strictly obey and want to do according the budget, at the end of the month the discrepancy between income and expense of your family will be certainly figured out, namely Rp250,000.
Thereby, it would be easier to make another plan froward, because you have already known that every end of the month you surely have discrepancy of Rp250,000, which can be used for another purpose.
However, sometimes people, although have already made up a simple budget, is still unable to meet their budget. If he, i.e. allocated Rp500,000 per month for shopping, the figure could expand to Rp750,000.
This can be prevented with a harder system, namely 'envelope system'. If you have already drawn up a budget, you should allocate the amount right away according to each post. Each post is represented by one envelope. If the money in the envelope is empty, you don't have to try opening the other envelopes, because you have already known that budget for the related post has touched its limit. Envelope system is a little complicated, but perhaps it is the sacrifice that you should doso that you will not experience deficit. The most important, your expense now is more controllable.
Starting right now, plan when you will get your salary, how much its amount, and when you will spend your money, what the posts and how much the amount of expenses. The plan called Budget.
In example, you will receive this much on your salary on 27th, then from that amount you will use this much for this expense, that amount for that expense, and so on. So, if you make a budget first, you will detect on the first place whether there will be deficit or not in the middle of the month. If yes, you can revise the budget to avoid deficit.
Composing budget is very easy. If you have already known the amount of average income and expense every month, you could also predict how much income and expense for the next coming months. Budget function
Many people feels uncomfortable to draw up and have budget. They think budget is the same with restrain their shopping desire.
NO. The function of a budget is to inform if your expense surpass your income or not. If yes, you ocan revise the budget so deficit can be avoided.
But, if you do not have budget, you will be difficult to know if your family expense has surpassed the income. So, if there is deficit at the end of the month, you just realize it at that time, after all has happened. IMPORTANT
Include saving in your budget. Usually people save their money later, after their money was spent. So, sometimes they cannot save their money because all of their money was spent for shopping.
Thereby, it would be better if saving is not included later but earlier. Therefore, when you draw up a budget, insert saving as one of the posts that you must do earlier, at least after you repay your loan.
Do the plan strictly.
A plan is useless if it is not done. In here, plan of income and expense as much as Rp250,000, if you strictly obey and want to do according the budget, at the end of the month the discrepancy between income and expense of your family will be certainly figured out, namely Rp250,000.
Thereby, it would be easier to make another plan froward, because you have already known that every end of the month you surely have discrepancy of Rp250,000, which can be used for another purpose.
However, sometimes people, although have already made up a simple budget, is still unable to meet their budget. If he, i.e. allocated Rp500,000 per month for shopping, the figure could expand to Rp750,000.
This can be prevented with a harder system, namely 'envelope system'. If you have already drawn up a budget, you should allocate the amount right away according to each post. Each post is represented by one envelope. If the money in the envelope is empty, you don't have to try opening the other envelopes, because you have already known that budget for the related post has touched its limit. Envelope system is a little complicated, but perhaps it is the sacrifice that you should doso that you will not experience deficit. The most important, your expense now is more controllable.
Langganan:
Postingan (Atom)
Postingan
